The Smart Elbow Bray Butterfly Valves Heavy Duty Low-Profile Clam Gates Basic Eagle Ticket Transfer System Slump Inspection Stand Anti-Overfill System Trans-Flo Pneumatic Unloader     THE SMART ELBOW Hammertek's "Smart Elbow" is now available through CPI as an excellent replacement part for worn out pipe sweeps used for pneumatically conveying cement, flyash for even sand. Also available as an option on new equipment. With tighter radius turns, locating and installing fill pipes is much more economical. Solves tough conveying problems where 90 or 45 degrees are needed Virtually Eliminates Wear Prevents Plugging and Surging Sch. 40 Pipe Size, Cast Iron Series 300 Burnell AVAILABLE MODELS     -     Hammerlast 265 Burnell (replaces 300 Series) 4" 90 Degree Elbow            4" 45 Degree Elbow            5" 90 Degree Elbow            5" 45 Degree Elbow            Hammerlast 400 Burnell 4" 90 Degree Elbow               4" 45 Degree Elbow               5" 90 Degree Elbow               5" 45 Degree Elbow                   BRAY BUTTERFLY VALVES Bray Series 30 Wafer Valves are an excellent choice as a replacement valve. These dry and wet service valves can also be specified on new equipment. Dry Service Valves have an undercut disc for extremely smooth operation for batching and discharging applications. High Strength, Through-Stem Design Spirolox Retaining Ring Non-Corrosive, Heavy-Duty Stem Bushing Stem Seal, Primary and Secondary Seals Torque and Grove Seat Design Nylon 11 Coated Ductile Disc and 316SS Stem AVAILABLE MODELS     -     Water Service with Actuator 2"              3"              6"              Dry Service with Actuator 8"              10"            12"               HEAVY DUTY - LOW PROFILE CLAM GATES Custom Series Aggregate Gates are an excellent replacement for light duty gates normally supplied on new batch plants. Many other sizes available. Gate leafs and gear segments available for rebuilding existing gate boxes. Entire Assembly is constructed of 3/8" Steel 3" Blank Flanges are Standard 12" Overall Height on Gates up to 16" x 16" Heavy Duty Oil-Impregnated Bronze Bushings Heavy Duty Cylinder Lug AVAILABLE MODELS     -     12" x 12"            12" x 14"            14" x 14"            15" x 15"            16" x 16"                The Basic EAGLE Ticket Transfer System Eagle's Mark II Air Lift System is a super-reliable pressure/vacuum system requiring power on one end of the system in a send/receive station called the "Power Pedestal" that can be located at either end of the system. The power pedestal moves carriers under pressure in one direction and under vacuum on the return in a "Push-Pull" system operation. System design allows the installation of intermediate stations for greater system usage and flexibility. The special features of the Mark II System, which is also designed for three inch for inch c diameter air lift include: Electrical Power at one end of the system, Send/Receive Station at non-powered end, it makes no noise whatsoever, and it also includes 120 feet of wire. Eagle Mark II Air-Lift Package Includes: Two (2) Stations with Automatic In-Use & Arrival Lights Stainless Steel Truck Station Safety Locking Doors & Solid State Circuitry Two (2) 90-degree Bends, 3" PVC Pipe Four (4) 3" x 9" Carriers 100 Feet of 3" Straight PVC Tubing All Necessary Couplings, Hanging Strap, Hardware, Cement and Cleaner 120 Feet of Wiring to Remote Station Installation Manual    Slump Inspection Stand The Slump Master offers an easy way to check concrete slump, add fibers, and wash trucks while following OSHA regulations and keeping employees safe, and is designed for long-lasting durability. The Slump Master Package Includes: All Galvanized Equipment and Fastening Hardware Adjustable Counter-Weight Swinging Platform Lock 36" Wide OSHA-Compliant Stairway 1 ½" Square Tubing Handrails 4" Square Tubing Supports All Required Safety Decals Click Here For Dimensional Specifications for a Single Slump Click Here For Dimensional Specifications for a Single Slump, Wash Platform and Pallet Rack Click Here For Dimensional Specifications for a Double Slump Click Here For Dimensional Specifications for a Double Slump, Wash Platform and Pallet Rack     Anti-Overfill System Existing bin level indicators monitor material level in the silo. When the material level reaches a level that is considered safe, the bin level indicator signals the control panel. The overfill light and horn are activated. When a preset time is reached (a variable timer is enclosed in the control panel), a signal activates the pinch valve which stops material flow, preventing serious damage to the storage silo and dust collection equipment. The Anti-Overfill Package Includes: Control Panel with Horn and Light Assembly Pinch Valve Solenoid Valve with All Fittings Two (2) Gaskets Two (2) Laser Cut Mating Flanges Sixteen (16) Bolts & Locks Washers 30 PSI Preset Air Regulator AVAILABLE MODELS - 4" SYSTEM and 5" SYSTEM Click Here For A Typical Installation Diagram     Trans-Flo Pnuematic Unloader (Shown with Optional Silencer) The Cement Unloading Package Includes: TEFC 220-44-/3/60, Class F Motor Full Capacity Relief Valve Discharge Check Valve Air Pressure Gauge Heavy Duty Inlet Filter Lubricant Level Gauge All Pre-Assembled on a Steel Base Click Here For More Information 30 HP and 40 HP AVAILABLE OPTIONAL SILENCER PACKAGE AVAILABLE